How to Install Window 7/8 from USB

There is very simple and easy method to install Window 8 and Window 7 from usb.The main advantage is that by using USB drive you will be able to install Windows 7 or Windows 8 in just 15 minutes.Requirements and method is given below.Requirements:
USB Flash Drive (Minimum 4GB)
Windows 7 or Windows 8 installation files.
Follow the below steps to create bootable Windows 7/Windows 8 USB drive using which you can install Windows 7 or Windows 8 easily.
Method:
Step 1:
 Plug-in your USB flash drive to USB port of your system.
Step 2:
 Move all the data from USB drive to a safe location on your system or format your USB.
Step 2:
 Open Run window. To open this Press (window key + R).

Step 3:
To open command prompt type "cmd" without qoutes in run window.Command prompt will open.

Step 4:
You need to know about the USB drive a little bit. Type in the following commands in the command prompt:
First type DISKPART and hit enter to see the below message.

Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB flash drive. In the below screenshot my Flash Drive Disk no is Disk 1.
Step 5:
Next type all the below commands one by one. Here I assume that your disk drive no is “Disk 1”.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above step to confirm it.
So below are the commands you need to type and execute one by one:
SELECT DISK 1
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT FS=NTFS
(Format process may take few seconds)
ASSIGN
EXIT
Don’t close the command prompt as we need to execute one more command at the next step. Just minimize it.

Step 6:
Next insert your Windows7/Windows 8 DVD into the optical drive and check the drive letter of the DVD drive. In this guide I will assume that your DVD drive letter is “D” and USB drive letter is “H” (open my computer to know about it).
Step 6: Maximize the minimized Command Prompt in the 5th step.Type the following command now:
D: CD BOOT and hit enter.Where “D” is your DVD drive letter.
CD BOOT and hit enter to see the below message.
Step 7: Type another command given below to update the USB drive with BOOTMGR compatible code.
BOOTSECT.EXE /NT60 H:

Where “H” is your USB drive letter. Once you enter the above command you will see the below message.
Step 8: Copy your Windows 7 or Windows 8 DVD contents to the USB flash drive.
Step 9: Your USB drive is ready to boot and install Windows 7 or Windows 8. Only thing you need to change the boot priority at the BIOS to USB from the HDD or CD ROM drive.
Note: If you are not able to boot after following this guide means you haven’t set the BIOS priority to USB.

Socializer Widget By Blogger Yard

SOCIALIZE IT →

Tweet

FOLLOW US →

SHARE IT →